Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3 I30N
With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the i30N and Veloster N.
Designed and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves!
Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.
Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity.
Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing.
The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.
As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor.
Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM.
This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions.
- Manufactured from 6082 aerospace grade aluminium
- Black anodised for ultimate protection and durability
- Increased capacity of over 150%
- No engine check lights (EML)
- Perfect fit with our induction kit
- Increased air flow
- Hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
- Made in the UK
- Lifetime warranty
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Associated Products
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Hyundai i30N Mk3 PFL/Veloster N Turbo Inlet Adaptor
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
Hi. The inlet adapter, will in fit onto the original pipe? I've an ITG intake on standard OEM opipework. I've a 2023 i30n DCT. Thank you Martin
No, the FMTIA2 hose fits 4 inch intakes only; not compatible with stock intake pipework.
Do you have torque specs for the 3 allen caps and for the 2 hose clamps?
hose clamps between 12-14NM . the m6 fasteners should be tightened to 12NM
Will this turbo inlet adapter fit my kona N?
No, we offer the part FMTIA10 for the Kona N as it has a different turbo coupling specification to the one sold under the part number you have referenced (FMTIA2).
Hi, I presume this turbo inlet adaptor will fit nicely together with the induction kit, would the car need a tune after fitting them both or is it literally just a bolt on job and ready to run? Thanks
Hello
Yes this product works with our FMINDK28 and both products can be installed to standard vehicles with no issues at all. You fulfill their full potential with a ECU software upgrade however.
Hi Will the turbo inlet adaptor fit a 2021 model my 3.5 i30 n dct. Thanks
Hello , the product you need is FMTIA10 for the MK3.5.
