Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
- Gains of up to 17BHP
- Black powder coating for ultimate protection and durability.
- Forge Pleated performance air filter
- No engine management check lights (EML)
- Increased air flow
- Lifetime warranty
This FMINDK37 is the cold air intake system for the Ford Focus ST Mk4 and has been designed to improve airflow in several key ways. It routes the air more directly into the vehicle’s engine, using an increased diameter CNC mandrel bent alloy pipe. This induction system also improves the airflow by adding our Forge high flow pleated air filter, in place of the more restrictive factory air filter.
The choice of air filter was made after many rolling road sessions and data logging test drives. As we have seen many times before with Ford power plants our Forge Hi-Flow pleated air filters gave the best results. The construction and build quality of the filter oozes superior quality and enhances the ST 280s engine bay. Forge Hi-Flow filters are made using a premium quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow.
The CAD designed, laser cut, and precision folded heat shield is designed to form a barrier between the air filter and radiant heat from the engine. It also helps duct the cold air to the air filter, to help preserve low intake temperatures. The heat shield is designed to incorporate the OEM air duct and fits directly to the standard factory air box mounting points and rubbers without the need for modification.
The diameters on this air intake have been carefully tuned to provide exactly the correct quantity of air flow into the turbo charger, ensuring consistent power gains throughout the rev range without any loss of low-end torque, increasing power and enhancing induction acoustics for added character and excitement.
We used Performance Remap in Gloucester with their VTEC 4 wheel-drive dynamometer, this was to ensure all our data has been collated independently, The results below speak for themselves, Testing and development took place on a MK4 ST 280 with Mountune STAGE 1 software. The stock dyno pulls gave a base figure of 307 BHP at 5458 RPM, from simply swapping out to the Forge Motorsport Intake in the matter of around 30 minutes, yields of over 17 BHP were achieved.
When studying the dyno graph below the peak torque figure does appear to be 5NM below the stock airbox figure however please take note of the 17NM gained from the Forge Motorsport induction kit throughout the midrange.
With both the BHP and torque figures held higher throughout the rev range your engine will definitely have the edge and feel more responsive when pushed to its limits. As with all Forge Motorsport products we offer a no quibble lifetime guarantee on all parts of this kit excluding the filter.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Dyno Results
We used Performance Remap in Gloucester with their VTEC 4 wheel-drive dynamometer, this was to ensure all our data has been collated independently, The results below speak for themselves, Testing and development took place on a MK4 ST 280 with Mountune STAGE 1 software. The stock dyno pulls gave a base figure of 307 BHP at 5458 RPM, from simply swapping out to the Forge Motorsport Intake in the matter of around 30 minutes, yields of over 17 BHP where achieved,
When studying the dyno graph below the peak Torque figure does appear to be 5NM below the stock airbox figure however please take note of the 17NM gained from the Forge Motorsport induction kit throughout the midrange.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
Goodmorning, Is the also a complete set comming? With a custom silicone hose from compressor inlet of turbo to Forge induction pipe?
Hello , at this moment in time the project is on hold.
