Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
· Stainless Steel Rivets
· Stainless Steel Fasteners
· Carbon fabric Outer Shell
· Calcium Magnesium Silicate Wool constructed Inner Core
· High temperature silica fabric
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
- T4
- T5
- T25
- The Garrett GTX28 and GTX30 Range
- Borg Warner EFR6258
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C
· Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C
· Radiant Heat Limit: 2500°F/1371°C
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Safety Information
Toxicological and Ecological Information
Acute Toxicity: According to its composition, this product should not be harmful in normal conditions of use.
Local Effects:
- Inhalation: Possible irritation of respiratory system. At high temperatures, products of thermal decomposition can be irritating to respiratory system.
- Ingestion: Can be considered not harmful if swallowed.
- Skin Contact: Can be considered as non-irritating to skin. Contact with the product, when handled at high temperatures, cause serious burns. At high temperature, products of thermal decomposition can be irritating to skin.
- Eye Contact: Can be considered as non-irritating to eyes. Contact with the product, when handled at high temperatures, can cause serious burns. At high temperature, products of thermal decomposition can be irritating to eyes.
- Ecotoxicity: Inert material. Persistence and degradation: Not biodegradable on the base of its structure.
Other Information:
- The information given in this Material Safety Data Sheet is based on knowledge available at the time of compilation and is intended to describe the product only in terms of health and safety requirements. It does not signify any warranty with regard to specific properties or specifications. The present product is designed for general industrial use.
First Aid Measures:
Eye Contact: Remove particles remaining under the eyelids. Wash well open immediately, abundantly and thoroughly with water. If irritation persists, consult an ophthalmologist.
Skin Contact: Cool skin with cold water after contact with molten compound and remove product with vegetable oil or paraffin. In case of adhesion, do not try to remove the product. Treat the affected areas as thermal burns.
Inhalation: Dust inhalation, inhalation of vapours from heated products, inhalation of vapours due to thermal decomposition. Move to fresh air and in case of persistent problems consults a doctor.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Forge Motorsport Turbo Blanket
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
I'm looking for a turbo blanket for my Ford Focus MK3 ST 2013 ST3 Borg warner turbo OEM Turbo & MANIFOLD, This looks like the only forge one that might fit, any help would be appreciated on if the item would fit or could you point me towards one that will work. Had to remove factory heat shield due to bolts seized in. Therefore not being refitted, so hence the reason why i'm on the hunt, for some type of turbo blanket before i start melting wires and hoses.
Good morning , im sorry we do not offer a blanket that is a direct fit for the turbo and vehicle in question,
Hi I have a rs5 b9 2017 with standard turbos will 2 of these be ok for them
Unfortunately not a test fitment we have carried out and cannot recommend this, nor any other turbo blanket we offer for this model.
Hello, do you ship to Germany? How much ist IT?
Hello, shipping is calculated at check out through our website.
Would this blanket fit a stock ea211 1.4TSI 125PS turbo
Hello
What year is your vehicle?
Will this fit my Abarth punto evo turbo? Cheers
No, the FMTUBL5 is not compatible; we offer the turbo blanket with part number FMTUBL5 for the Fiat Punto Evo Multiair model with Garrett turbo fitted.
I have a turbo with a circumference of ~44cm and a width of ~6cm, do you know if this product will fit? Forge Motorsport Turbo Blanket Product code: FMTUBL1
do you know the turbo specifics ? or can you forward me a picture ? is the turbo internally or externally gated ?
ciao, io ho un'audi s3 8y 2021 è compatibile questa copertura?
hello , Yes this is compatible
Will this fit a KO3 turbo on a 1.8T AUM engine?
hello , unfortunately this is not compatible with the 1.8 t 20v
Does this fit the Cupra leon 300 mk4?
Hello
Yes this product is compatible with your vehicle.
Hi what blanket for a Garrett gtx2867r gen 2 please? Thanks.
hello , is the turbo internally or externally gated ?
Hi, looking for a blanket to fit the Tial 2803 V band housing? It’s on a GTX3071R.
FMTUBL13 is the option we recommended for the quoted specifications.
Hello, your turbo blankets, will they work with a GT2554r with internal waste gate? I’m worrying about interference with the waste gate lever arm on the turbine exist. Cheers
Please send me a picture of your turbo in question.
Fit a 2020 Golf TCR (290PS)?
hello , yes this is compatible.
Will this fit a Subaru Impreza TD05 20G turbo built by Robert knight Thanks Corey
The product required is FMTUBL2
Hi, Ive got a Garrett gt28 turbo will this fit? Cheers
it depends on the size of the hot side compressor , do you know the size ?
Hi I have a gtx2971r turbo will this fit? Regards
Hello , we would recommend using our turbo blanket FMTUBL12
for your application.
Hello...my car is audi s3 8v sportback 06/05/2016 model which turbo blanket do you recommend?
Hello,
FMTUBL1 is compatible with your vehicle.
Hi I was looking at your universal turbo blanket I need to know what size to order my turbo is a td04 do i need to order the t4 blanket Thanks
Hello , i would recomend FMTUBL12
