Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
Highlights:
- 0.4L capacity*
- Bespoke fitting kit for Hyundai i20N
- A drain tap for ease of emptying
- A dipstick for simple level inspection
- 2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look
- Installation is straight forward with all necessary fittings and instructions included
- Lifetime warranty
FMCT10 is our oil catch can solution which is a bespoke design for the Hyundai i20N. This oil catch has been developed by our in-house development team, not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapors and moisture. All of which would ordinarily make their way back through to the inlet of the engine.
Everything from the CNC machined billet tank to the laser cut bracket have been manufactured in Gloucester, UK. With its anodised black finish to give a classy OEM look, this is a product that is not only functional but lifts the look of the Hyundai’s engine bay.
Extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and something we highly recommend, particularly if you are planning more advanced power tuning at a later date. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a conveniently placed drain tap.
The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F)
As with all Forge Motorsport products, FMCT10 comes with our comprehensive installation instructions and is covered with our legendary lifetime warranty!
Please note that this only fits right hand drive vehicles
Complimentary Products
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
How easy is it to empty the catch can on this car? are you able to get a pan underneath the can? Where is the valve for emptying?
Hello
Its quite straight forward, there is a tap at the bottom of the catch can to release the gunk. Use a small bag under the tap and open it and collect the contents.
Hello there...did you make one for the left hand drive I20N...Cheers
Hello, no we do not offer a LHD solution.
Does the oil catch tank comply with the manufacturers warranty in the UK?
All manufacturers have different policy’s on vehicle modifications, my advice would be to check with your local dealership.
Is it possible that we can mount the can somewhere else in the engine bay so that it can still do the work? If not is it possible for you gyus to make an oil catch can for the left hand driven cars....cheers
hello , we may possibly look into this in the future for our LHD customers.
Hello. I have a question about the oil tank. Do I understand correctly that only the bracket does not fit left-hand drive? But the tank and the hoses also fit left-hand drive vehicles. Best regards
Hello
The reasion the catch can does not fit is because on the left hand drive the brake servo is on the other side of the vehicle, this then gets in the way of where the catch can should be fitted. All the hoses would still fit however.
Hello, I am considering purchasing an Oil Catch Tank for my Hyundai i20N. However, the product description indicates that it is only compatible with right-hand drive vehicles. Does this mean that it will not fit the European version of the car? Could you please provide clarification on this matter?
Hello,
Yes this product will NOT fit vehicles which have the steering wheel on the left hand side, but WILL fit vehicles with steering wheel on the right hand side.
Hope this helps.
