Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product
After looking at the problems associated with the lack of adjustment on the 4 wheel drive vehicles, especially noticeable when the vehicle has been lowered, we decided to look for the best solution. It was about this time that owners were starting to report in Europe that they were experiencing the rear control arms snapping.
Rather than looking at an eccentric bush replacement, we decided to re-engineer the rear control arm to what it should have been in the first place.
We started by adding the means of adjustment, then added strengthening, especially as we appreciate that many of our customers may be using their vehicles on the track. Then we had polyurethane bushes made because they offer far better characteristics. After many months of rigorous testing we are now confident we have the perfect solution.
If you ignore the obvious benefits of reducing uneven tire wear and improving the tire surface contact area, the seat of the pants ride is far better. If you just return the car to the OEM original geometry settings, you find that the tram lining feel disappears and the turn in is far crisper. Of course, if you are willing to experiment with the settings to maximise any other modifications on your car, then this set up is for you. You may be interested to know that the "Le Mans" or "S-lines" that come with the -20mm suspension also benefit from these arms in a big way.
As we continually monitor and evaluate our products we have recently revised the production of these rear tie bars with the addition of a corrosion resistant powder coating process, to ensure the maximum longevity even in the worst environments.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
do you need 2 sets of these for upper & lower? or just the one set?
Two sets are required for replacement of both upper and lower tie bars.
Will these fit Audi S3 8l (2002)
Yes the tie bars with product code FMAUITB2 is compatible with the 1.8T Audi S3 (8L) models.
Will these fit the V6 4Motion? Cheers
hello , yes these will fit the MK4 v6 4motion
Are the tie bars priced for a pair? Thanks
