Description
Product Description
As previously, when we developed our highly acclaimed kit for the pre 2011 models , we teamed up with one of the world leaders when it comes to oil cooling, Mocal, and together we have again produced a comprehensive kit that relies on both companies expertise and delivers excellent results.
The cooler itself is a massive Mocal unit, fully ducted into the spare duct on the front bumper which improves the coolers efficiency. It's fed by braided lines with aluminium hose ends. The pump is Mocal’s own, delivering an amazing 5 litres of transmission oil every 30 seconds to the cooler – enough to completely change the oil in the transmission every minute!
The transmission cooler is thermostatically controlled so only comes on when the transmission oil reaches 100 deg C (212 deg F), and turns off again at 95 deg C (203 deg F). This allows the transmission to reach a temperature that burns off any water based contaminants in the oil (e.g. condensation) before the cooler cuts in. During independent track testing the cooler brought the temperatures down to the point the cooler turned off, i.e. below 95 C (203 F)
This is a COMPLETE kit – all nuts/bolts/brackets are included, together with a genuine Nissan sump gasket, and a bespoke wiring harness with all the connections pre-made. A CD is included that provides a full colour installation guide around 40 pages long. This cooler adds 2 litres of oil to the system so please take that into account when you are purchasing the oil for this installation.
To purchase this product, or for further information, please contact:
Litchfield Motors
Email: info@litchfieldmotors.com
Telephone: +44(0)1684 850999
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Transmission Cooler for the Nissan GT R35 2011 Models
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Visit our UK Site
Visit our USA Site
Visit our Asia Site






