Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
- Fits Peugeot 308 GTI MK2
- Proven to withstand temperatures up to 2500°F or 1370°C
- Prolongs the life of engine components
- Improves the appearance of the 308’s engine bay
- Stainless Steel Rivets and Fasteners
- Carbon fabric outer shell
- Calcium Magnesium Silicate Wool constructed Inner Core
- High temperature Silica fabric
The Forge Motorsport FMTUBL14 is a turbo blanket that has been specifically designed for the Peugeot 308 GTI MK2. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The OE heat shield still allows a considerable amount of heat transfer thus creating a warmer engine compartment, which will have an effect on the engines components and increase intake temperatures.
This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. As a bonus the FMTUBL14 improves the appearance of the 308’s engine bay considerably,
The OEM turbo heat shield tarnishes over many heat cycles, a problem which does not affect Forge Motorsport turbo blankets. All Forge Motorsport turbo blankets are designed and manufactured to the highest standards and use superior materials, unlike some turbo blankets which are constructed using substandard materials.
Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be removed as this can cause damage to the blanket.
Complimentary Products
Our uprated Forge dump valve for the Peugeot 308 GTI has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Peugeot 308 GTI, this is a fully atmospheric blow off valve, so you can enjoy that fantastic “pshh” sound! This part replaces OEM part number 9808798580
A set of 4 ultra-high performance brake lines. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit.These lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harshest conditions.
Our complete plug and play intercooler solution for the Peugeot 308 GTI. With reports of the IATS (inlet air temps) reaching dangerous levels on track days in the summer months resulting in the engines ECU pulling out timing to prevent detonation. This can cause damage to your vehicles engine thus resulting in a loss of power in the highly tuned 1.6 litre engine.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Associated Products
Safety Information
Toxicological and Ecological Information
Acute Toxicity: According to its composition, this product should not be harmful in normal conditions of use.
Local Effects:
- Inhalation: Possible irritation of respiratory system. At high temperatures, products of thermal decomposition can be irritating to respiratory system.
- Ingestion: Can be considered not harmful if swallowed.
- Skin Contact: Can be considered as non-irritating to skin. Contact with the product, when handled at high temperatures, cause serious burns. At high temperature, products of thermal decomposition can be irritating to skin.
- Eye Contact: Can be considered as non-irritating to eyes. Contact with the product, when handled at high temperatures, can cause serious burns. At high temperature, products of thermal decomposition can be irritating to eyes.
- Ecotoxicity: Inert material. Persistence and degradation: Not biodegradable on the base of its structure.
Other Information:
- The information given in this Material Safety Data Sheet is based on knowledge available at the time of compilation and is intended to describe the product only in terms of health and safety requirements. It does not signify any warranty with regard to specific properties or specifications. The present product is designed for general industrial use.
First Aid Measures:
Eye Contact: Remove particles remaining under the eyelids. Wash well open immediately, abundantly and thoroughly with water. If irritation persists, consult an ophthalmologist.
Skin Contact: Cool skin with cold water after contact with molten compound and remove product with vegetable oil or paraffin. In case of adhesion, do not try to remove the product. Treat the affected areas as thermal burns.
Inhalation: Dust inhalation, inhalation of vapours from heated products, inhalation of vapours due to thermal decomposition. Move to fresh air and in case of persistent problems consults a doctor.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Turbo Blanket for the Peugeot 308 GTI MK2 (2015-2020)
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
I'm interested in the turbo blanket, but says for 308 gti upto 2020. I've a 21 plate, would it fit?
Hello
Can you please send me a picture of your engine bay to confirm.
Regards
