Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
If you have a 2022 onwards model, you can find the appropriate valve here
As the engine does not have a diverter valve fitted as standard, Forge have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle, but also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure. Especially on modified vehicles.
This valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger. The kit includes all of the necessary hardware and step by step installation instructions for any car enthusiast with appropriate garage tools to fit at home, in just a couple of hours!
As the engine does not have a diverter valve fitted as standard, Forge Motorsport have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle but it also increases the throttle response during gear changes by reducing turbo lag, it is designed to help the turbocharger maintain its rotational speed ready for when you accelerate, as well as prolonging the life of your turbo.
PLEASE NOTE TO DETERMINE WHICH IS THE CORRECT DUMPVALVE KIT FOR YOUR VEHICLE PLEASE STUDY THE PICTURES BELOW. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT US.
For the engine below, the correct valve is FMDV39
For the engine below, this is the correct valve.
Due to the exposed position of the OEM boost pipe and the nature of heat cycle, the plastic that the OEM pipe is made from can deteriorate over time, becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours!).
Highlights:
- CNC machined billet couplers and components
- CNC machined twin piston Forge valve
- Three hose options: red, blue, or black (Custom available but will incur a 50% non-refundable deposit and a lead time of 8-10 weeks)
- Forge valve will not bring on any check engine lights (EML)
- The hose has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time. Forge Motorsport lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically.
- The hose from this kit replaces OEM part numbers 05E.145.673.E and 05E.145.674.E
- We cannot guarantee that this product will fit with all aftermarket intakes.
- Lifetime warranty
- We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
In the Box:
1 x Atmospheric Dump Valve
1 x Boost Tap/Take Off
Throttle Body and Turbo Couplers
1 x Silicone Hose (Red, Blue or Black)
3 x Hose Clamps
All fixings and fittings
1 x Roll of Vacuum Tubing
1 x Forge Sticker
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Blow Off Valve for VW, Audi, Seat & Skoda 1.5 TSI (up to 2022)
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
My 1.5 tsi evo r-line golf 2019 is bone stock will this be part be okay for it?
Hello Yes this product would be compatible with your vehicle and will work fine on a stock car.
hi there forge will this fit a 2017 m7.5 golf 1.5 r line tsi evo
Hello
Yes this product is compatible with your vehicle.
Hola buenas tardes que muelle debo poner entre el amarillo o el azul gracias
Is your vehicle tuned?
¿Su vehículo está tuneado?
Hi i have the 2020 skoda octavia 1.5 petrol would this fit, thanks
Hello
Yes this product is compatible with your vehicle.
Hi I have the 2018 Ibiza fr 1.5 petrol would this fit, thanks
Hello
Yes this product is compatible with your vehicle.
Hi, will this valve fit on a 2021 Seat Leon KL 1.5 eTSI? Thanks !
Hello
The product you need is FMDV39.
Diference between this prod and the dump valve?
A blow off valve and dump valve are the same thing, it’s just the terminology used by the aftermarket.
Hello, does this fit the Audi A3 8v Facelift 1.5TFSI ?
Yes, the FMDV22 is compatible with the facelift Audi A3 1.5 TFSI.
will this fit the us model 1.5 turbo in a vw taos
Hello
The product you will need is FMDV39, however to be 100% sure please send me a picture of your engine bay to confirm fitment.
Würde das Set bei dem T-Roc Bj.21 150 PS 1.5 Tsi R-Line pssen mit dem Entlüftungsadapter passen?
Hello
You will need either FMDV22 or FMDV39.
Please read both listings to check which product is compatible.
Hi would this fit my Audi a1 1.6 tdi s line 2013
I’m sorry this will not work or fit on a diesel application.
hello, i have golf 8 1.5 etsi, is there a one-to-one kit for my car?
Hello
We have a new kit to fit your vehicle the part number is FMDV39 this will be avalible in the next month so keep a look for this.
Bonjour, le produit est il compatible pour une mini Cooper 1.5 moteur b38?
Bonjour
Non, je crains que ce ne soit pas compatible avec ce moteur.
No I am afraid this is not compatible with this engine.
What’s the difference between this product and the Recirculation Valve?
Hello , the atmospheric valve vents to atmosphere and the recirculation puts air back into the inlet tract , the recirculating version is only compatible with the forge intake FMINDK35.
Good morning, Can the Blow Off Valve kit for VW 1.5 TSI also be installed on a golf 8 1.5 etsi 150 hp? Waiting for your reply, I send you my best regards. Daniel
Hello , we are currently working n a solution for the golf ETSI, i would estimate we will have a suitable product by the end february to middle or march.
