Visit our UK Site
Visit our USA Site
Visit our Asia Site
Description
Product Description
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
- The Forge atmospheric Blow Off valve for the Renault Megane is made from billet aluminium.
- This atmospheric blow off valve dumps the charge-air to atmosphere creating the "Whoosh" sound when the throttle is lifted.
- Improves the throttle response and increases the clamping load to maintain boost pressure more reliably.
- Unlike single piston or diaphragm diverter valves, this uses counter balanced springs and dual pistons to prevent the valve from leaking air into the intake system at idle. This prevents our blow off valves suffering any of the failures associated with single piston and diaphragm type diverter valves.
- The valve itself is of dual piston design for longevity with the ability to be serviced and tuned with replacement springs if required. (See below)
This Blow Off or Dump valve has been specifically designed for the Renault Megane RS250 RS265 and RS275. This kit includes a blanking plate, as the original or OEM valve should be removed to prevent issues with loss of boost pressure. This kit is available with either a red, blue, or black silicone hose, and contains everything needed for installation.
Please select the colour required in the options above.
- The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
- The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically.
- The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
- Lifetime warranty
In The Box:
1 x FMDVRMA Valve
1 x 500mm of 4mm Vacuum Tube
1 x 38mm Aluminium Hose Joiner
1 x Uprated Blue Spring
1 x MIE Blanking Plate
1 x 45mm Hose Clamp
1 x Silicone Reducing Elbow #588
1 x M6 Penny Washer
1 x M6 Plain Washer
1 x M6 x 16 Hex Head Bolt
1 x M6 Nyloc Nut
1 x 5mm T Piece
1 x Instructions
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Blow Off Valve for Renault Megane RS250/265/275
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
Hi just want to double check this will fit my car it’s a Renault Megan ta 250 cup 2010 ?
yes
Which spring should be used for a unmodified car?
Hello, use the supplied Green spring which should be the spring which is fitted to the valve when it arrives.
