Description
Product Description
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
This kit includes everything that you will require to install the atmospheric dump/blow off valve to your 600cc petrol Fortwo's, all 700cc petrol Fortwo's, all Roadsters, and the Crossblade up to the early 2007 model year. Also included in this kit is a replacement silicone boost hose.
These will not fit the Forfour, the 800cc diesel Fortwo or the new 999cc Fortwo, , including the 999cc Fortwo Brabus.
The valve has been specially designed for this vehicle and uses twin springs and dual pistons to prevent the valve from leaking air into the intake system at idle with a 12mm inlet to ensure a faster air velocity so that it sounds fantastic.
Please choose the hose colour using the options above.
In The Box:
1 x FMSCDVK Valve
1 x 5mm T Piece
1 x 500mm of 4mm Vacuum Tube
3 x Cable Ties
1 x 35mm Hose Clamp
2 x 55mm Hose Clamp
1 x Silicon Boost Hose, with Valve Take Off
1 x Instructions
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.
If you are unsure if this product is suitable for your application, please contact us.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Smart Car Piston Dump Valve and Fitting Kit
Warranty
10 Year Warranty Information
The majority of Forge Motorsport products come with a limited 10 Year Warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +49(0)3222/1097-308 or email info@forgemotorsport.eu.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
European Shipping
We ship to selected EU countries as displayed during the checkout process.
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and your destination.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact us if you require any more information via our contact page.
We reserve the right to change the delivery service and our shipping providers at any time.
Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper, however we may be able to assist in some cases.
FAQ's and other info can be found here.
Manufacturer & EU Contact Details
Manufacturer
Company Name: Forge Motorsport
Address: Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU, United Kingdom
E-Mail: info@forgemotorsport.co.uk
Phone: +44 1452 380999
EU Responsible Person
Company Name: Milltek Sport GmbH
Address: Gottlieb-Daimler-Str. 1-3, 53520 Meuspath
E-Mail: info@millteksport.de
Phone: +49 (0) 3222 1097308
Expert Answers
Will this BOV fit a Smart Brabus 451? 2009 & 999cc Thank you. If not, do you stock the correct model?
Unfortunately not, the Smart Car dump valve and fitting kit only fits the 600cc and 700cc models.
Which springs/colour and how many are needed to replace?
The Smart Car dump valve contains two spring specifications (twin piston valve requiring two springs). Both of the springs are the yellow colour code, one being the product code FMSS114 and the other FMDVSU110, the yellow spring selectable on bot the quoted product pages.
Hi, are you able to sell the pipe only?
Yes, search for the part/product code FMKTSC1 on the Forge Motorsport website.
Where does the t piece fit on the smart roadster
This should be plumbed to the fuel pressure regulator.
Visit our UK Site
Visit our USA Site
Visit our Asia Site













